Belt Conveyor Crowned Ceramic /Herringbone/Diamond/ Polyurethane Grooved Hot Vulcanized Rubber Coating Lining Lagging Magnetic Motorized Drum Pulley

• Material: Carbon Steel
• Surface Treatment: Baking Paint
• Motor Type: Frequency Control Motor
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: CEMA DIN AFNOR JIS FEM BS
• Installation: Multi-Layer
• Pulley Type: Drive/Head/Tail/Snub/Take up/Bend/Return
• Pulley Dia.: 315/400/500/630/800/1000/1250/1400/1600
• Rubber Lagging: Ceramic/Smooth/Diamond/Herringbone/Polyurethane
• Pulley Lagging Type: Hot Vulcanized and Cold Adhesive
• Light Connection Mode: The Shaft and Hub Are Single-Width Plate Welded Cy
• Medium Connection Mode: The Shaft and Hub Are Expansion Sleeve Connection
• Balance Treatment: Dynamic Balance and Static Balance
• Pulley Structure: Tube/Shaft/Bearing/Bearing Block/Hub/Bushing
• Bearing Type: Self-Aligning Ball Bearings
• Bearing Band: Hrb/NSK
• Welding: Submerged Arc Welding
• Shaft Material: 45# Steel/40crmnmo/Stainless Steel
• Tube Material: Q235/Q355/J355/Ss400/Stainless Steel
• End Disc Material: Cast Iron/Cast Steel/Zn35
• Rubber Hardness: 60/65/70 Shore
• Transport Package: Wooden Box Packing and Pallet Packing
• Specification: BW650, BW800, BW1000, BW1200, BW1400, BW1600,
• Trademark: KONWEYOUR
• Origin: Hengshui, China
• HS Code: 8431390000
• Production Capacity: 3000 Pieces Per Month
• Package Size: 60.00cm * 50.00cm * 65.00cm
• Package Gross Weight: 100.000kg
• Lead Time: 7 days (1 - 1 Pieces) ; To be negotiated ( > 1 Pieces)

Product Description

Product Description

 

A conveyor will always consist of at least two pulleys, head pulley and tail pulley, with additional pulleys used depending on the configuration. Standard-duty pulleys are usually adequate for simple applications, but mine-duty and engineered pulleys are also available where heavy-duty pulleys are required.


Different kinds of conveyor pulleys
KONWEYOUR® sells conveyor pulleys in all the following sub-categories: 

Head pulleys

The head pulley is located at the discharge point of the conveyor. It usually drives the conveyor and often has a larger diameter than other pulleys. For better traction, the head pulley is usually lagged (with either rubber or ceramic lagging material).

Tail and wing pulleys

The tail pulley is located at the loading end of the belt. It comes with either a flat face or a slatted profile (wing pulley), which cleans the belt by allowing material to fall between the support members.

Snub pulleys

A snub pulley improves the traction of the drive pulley, by increasing its belt wrap angle.

Drive pulleys

Drive pulleys, which can also be the head pulley, are driven by a motor and power transmission unit to propel the belt and material to the discharge.

Bend pulleys

A bend pulley is used for changing the direction of the belt.

Take-up pulley

A take-up pulley is used to provide the belt with the proper amount of tension. Its position is adjustable.

Product Parameters

 

Type	Belt width(mm)	Standard Diameter(mm)	Length(mm)
Drive Pulley	500	500	Length of the pulley depends on the belt width of the conveyor
	650	500~630
	800	630~1000
	1000	800~1150
	1200	800~1150
	1400	1000~1350
	1600	1150~1600
	1800	1150~1800
	2000	1350~2000
	2200	1600~2200
	2400	1800~2400
Bend Pully	500	250~500
	650	250~630
	800	250~1000
	1000	250~1600
	1200	250~1600
	1400	315~1600
	1600	400~1600
	1800	400~1600
	2000	500~1600
	2200	630~1600
	2400	800~1600

Packaging & Shipping

 

Detailed Photos