Belt Herringbone/Chevron/Diamond/Spiral Vulcanized Lagging Pulley

• Customization: Available
• Material: Carbon Steel
• Surface Treatment: Polishing
• Model NO.: TD75/DTII/DTII(A)
• Motor Type: No
• Installation: Multi-Layer
• Pulley Type: Head Pulley, Tail Pulley, Snub Pulley, Take up Pul
• Diameter: 102mm-1800mm
• Surface: Smooth, Diamond Grooved Lagging, Herringbone Laggi
• Welding: Submerged Arc Welding
• Balance Treatment: Dynamic Equilibrium and Static Equilibrium
• Structure: Tube, Shaft, Self-Aligning Bearing, Bearing Seat
• Pulley Lagging Type: Heat/Thermal Vulcanized Rubber Casting, Rubber Lag
• Standard: CEMA, JIS, DIN, ISO, GB
• Bearing Type: Self-Aligning Ball Bearings
• Bearing Band: HRB, NSK
• Transport Package: Wooden Box Packing and Pallet Packing
• Specification: Steel(Q235)
• Trademark: JTURN
• Origin: Hengshui
• HS Code: 8431390000
• Production Capacity: 3000 Pieces Per Month

Product Description

Product Description

Product Parameters

 

Type	Belt width(mm)	Standard Diameter(mm)	Length(mm)
Drive Pulley	500	500	Length of the pulley depends on the belt width of the conveyor
	650	500~630
	800	630~1000
	1000	800~1150
	1200	800~1150
	1400	1000~1350
	1600	1150~1600
	1800	1150~1800
	2000	1350~2000
	2200	1600~2200
	2400	1800~2400
Bend Pully	500	250~500
	650	250~630
	800	250~1000
	1000	250~1600
	1200	250~1600
	1400	315~1600
	1600	400~1600
	1800	400~1600
	2000	500~1600
	2200	630~1600
	2400	800~1600

Detailed Photos

 

Packaging & Shipping

 

A conveyor pulley is a mechanical device similar to a conveyor roller that is used to change the direction of the belt in a conveyor system or to drive the belt or to put tension on the belt.

 

A conveyor pulley is more heavy-duty than a roller and is used at either end of a conveyor, or near the drive/motor. Choosing the right conveyor belt pulley can get tricky, which is where Heinrich Brothers Inc. can offer expert assistance.

Choose One of the Many Types of Conveyor Belt Pulleys:

Drive Pulley / Head Pulley

• A Drive Pulley or Head Pulley is used for the purpose of driving a conveyor belt. They are normally mounted in external type bearings and driven by a motor and reducer. Conveyor head pulleys can be flat faced or crowned and many have lagging to reduce belt slippage. Conveyor drum pulleys, wing pulleys and spiral pulleys are the most common style of drive pulleys.

Return Pulley / Tail Pulley

• Return/Tail pulleys are used to redirect a conveyor belt back toward the drive pulley. Conveyor tail pulleys can have internal bearings or can be mounted in external bearings and are usually located at the end of the conveyor bed. Conveyor tail pulleys commonly serve the purpose of a Take-Up pulley to keep tension on the belt.

Idler Pulley

• Any free spinning pulley used in a non-drive position used to support the belt.

Snub Pulley

• A conveyor pulley used to increase belt wrap tension around a drive pulley, typically for the purpose of improving belt traction.

Take-Up Pulley

• A conveyor pulley that can be adjusted in a bracket to increase or decrease belt slack or belt tension.

Bend Pulley

• A conveyor pulley used to redirect the belt and provide belt tension where bends occur in the conveyor system.